Top Five Frequently Asked Questions
HOW MUCH DOES TREX DECKING COST?
The cost of a Trex deck typically?runs from $9 to $16 per square foot. Of course, that depends on where you're buying it, and how much you’re purchasing. Visit our Cost Calculator for a customized estimate.
WHY ARE TREX OUTDOOR LIVING PRODUCTS BETTER THAN WOOD?
When it comes to Trex vs. wood, there's more to the story than the upfront price. While wood may be cheaper on day one, it could end up costing you far more by day 365 (and well beyond). Trex means quality, beauty and minimal maintenance, saving you time, money and everything that comes with a call to the handyman. Plus, the high-performance composite shell of Trex decking resists rotting, staining and cracking.
WHICH TYPE OF DECKING DO I OWN?
Please refer to the Decking and Railing section of this FAQ for details on all of our product lines, and to explore the difference between our early-generation and newer-generation decking. Unsure if your deck is made with Trex? Start by?reviewing our decking product lines?to compare your decking against our collection. If you're still unsure, contact us over the phone.
HOW DO I CLEAN MY TREX DECK?
Trex decking is designed for a low-maintenance experience. A simple soap-and-water clean is all it takes. For more details, refer to our?Care and Cleaning?section.
HOW DO I INSTALL MY TREX PRODUCT?
- Why is Trex? decking better than wood?
- If Trex is made from recycled materials, why is it more expensive than wood?
- What is the lifetime value of Trex?
- What is the difference between Trex early-generation and the newer, high-performance composite decking?
- How can I tell if I have early-generation or newer-generation decking?
- Can you send me product samples?
WHY IS TREX? DECKING BETTER THAN WOOD? Top
Trex products offer superior durability and performance that you can't get from wood. Trex decking resists termites, won't rot, warp, or splinter-and never needs staining or painting. What's more, Trex decking is made from 95% recycled materials: That's an eco-friendly decking choice you can feel great about. To learn more please review our?Trex vs. Wood?page.
IF TREX IS MADE FROM RECYCLED MATERIALS, WHY IS IT MORE EXPENSIVE THAN WOOD? Top
While most of the raw materials used in making Trex are recycled, these materials are carefully processed to ensure the highest level of quality and performance. The end result is decking that performs better than wood, lowering your cost over time through lesser maintenance. To learn more please review our?Always Green?page.
WHAT IS THE LIFETIME VALUE OF TREX? Top
With pressure-treated wood decks, maintenance costs add up over time. Although Trex costs more initially, you'll never have to sand, stain or paint your Trex deck. Over the life of your deck, those reduced maintenance costs add up to a greater value than wood—not to mention the value of the added time spent enjoying your deck rather than working on it.
WHAT IS THE DIFFERENCE BETWEEN TREX EARLY-GENERATION AND THE NEWER, HIGH-PERFORMANCE COMPOSITE DECKING? Top
Understanding the differences between early-generation Trex decking and new high-performance Trex decking is an important factor in understanding what to expect from different kinds of decking. You'll notice a few key differences in performance and longevity, but there is one benefit both products have in common: Each is made from 95% recycled materials.
HOW CAN I TELL IF I HAVE EARLY-GENERATION OR NEWER-GENERATION DECKING? Top
If you've noticed any staining, scratching or fading over the years, it's likely you have early-generation decking. While our early-generation decking was groundbreaking for its time, spills and scuffs can still leave a mark. Newer-generation decking is easy to spot because of its resilience. Today's Trex decks resist blemishes with an innovative, high-performance shell that wraps around three sides of our deck boards.
EARLY GENERATION TREX
Early-generation composite decking (Trex Origins?, Trex Accents?, Trex Profiles?, Trex Brasilia? and Trex Contours?) represented a breakthrough for low-maintenance and durability. While wood decking inevitably suffered splinters, warping and rotting, and required considerable maintenance, early-generation Trex never had to be stained and did not rot, warp or twist like wood. Periodic cleanings with a composite deck cleaner were far easier than the dreaded sanding and staining required to maintain wood decks. As the category evolved, this early-generation composite was offered in additional colors and with grain patterns that reflected a more natural appearance. Even so, all early generation wood-plastic composites, whether Trex or a competitor's product, were not stain, scratch or mold-free, and did fade slightly in color as they naturally weathered. To address these issues, Trex introduced a new kind of high-performance decking in 2010. As of 2014, Trex no longer manufactures any early-generation composite decking.
NEWER-GENERATION HIGH PERFORMANCE TREX DECKING
Newer-generation Trex deck boards (Trex Transcend?, Trex Enhance?, Trex Select?, Trex Contour?) are manufactured with a high-performance shell that wraps around three sides of the composite board to protect it from the elements, providing resistance to fading, staining, scratching and mold. In addition to improved performance, the shell technology offers:
- Easier maintenance: requiring only an occasional cleaning with soap and water or a pressure washer.
- Enhanced aesthetics: richer, long-lasting color palettes and natural wood grain patterns.
- Incremental warranty protection: a 25-year limited residential fade and stain warranty.
CAN YOU SEND ME PRODUCT SAMPLES? Top
You can find Trex decking samples a number of ways. At?shop.trex.com, you can order 12-inch samples of Trex decking in every color. Samples are $5 each, including tax and shipping, and will be delivered to your door. You also can find 3 1/2-inch decking samples free of charge at selected local?Trex dealers and retailers?and through your local?TrexPro? contractor.
- What materials are used in the manufacturing of Trex??decks?
- What is the difference between your good, better and best product lines?
- Does Trex fade or change color?
- Does Trex decking get hotter than pressure-treated wood under the sun?
- How much does Trex decking and railing cost?
- Is Trex suitable for use in commercial settings?
- How heavy is Trex decking?
- Is Trex code-compliant?
- Is Trex structural?
- Is Trex fire resistant?
- Can I build a firepit on my Trex deck?
- Can I place rugs on my Trex deck?
- Can Trex be curved?
- Can a groove be cut in the side of a Trex deck board?
- Can you rip a Trex board?
- Can Trex deck boards be glued?
- Can Trex be placed over a solid surface?
- Can I paint or stain my Trex boards?
- Can I use a non-recommended fastener to install Trex decking?
WHAT MATERIALS ARE USED IN THE MANUFACTURING OF TREX? DECKS? Top
Trex decking is made from 95% recycled materials, including reclaimed wood and sawdust as well as recycled plastic from many common household items, such as the plastic overwrap on packaging for paper towels and toilet paper, dry cleaner bags, newspaper bags, grocery and shopping bags. Trex annually salvages and keeps more than 500 million pounds of plastic and wood scrap out of landfills. That makes Trex one of the largest plastic film recyclers in the U.S. In fact, the average 500-square-foot composite Trex deck contains 140,000 recycled plastic bags. To learn more, please visit our?Always Green?page.
WHAT IS THE DIFFERENCE BETWEEN YOUR GOOD, BETTER AND BEST PRODUCT LINES? Top
Trex high-performance decking and railing products combine low-maintenance upkeep and designminded style—all backed by our?25-year Limited Residential Warranty. The protective shell technology means all of our deck boards resist staining, fading and cracking, with the highest level of scratch resistance available from our Transcend Earth Tones and Tropicals decking lines, followed by Select Earth Tones, Enhance Naturals and Enhance Basics. Beyond that, Trex offers a variety of high-performance railing choices to meet different levels of style, performance and affordability.
- [BEST]?Trex Transcend??decking offers the broadest range of decking colors and finishes (including five Earth Tones and five Tropicals). Engineered with a proprietary shell technology that protects against fading, staining, scratching, mold and mildew, Transcend decking offers elevated aesthetics paired with the highest level of performance. Plus, Transcend deck boards offer the beauty of exotic wood—without the environmental strain of harvesting endangered forests.
- [BETTER] Our?Trex Select??Earth Tones and?Trex Enhance??Naturals collections both offer high performance in five versatile colors. No matter which you choose, their fade and stain protections as well as enhanced mold and mildew resistance make maintenance simple. The question then becomes: what hue suits you??
If a classic solid is your style, Select Earth Tones deliver rich, opaque color to your yard. The perfect pairing of price and minimal maintenance, Select is a simple choice, particularly if you want a composite board with a profile that not only resembles traditional lumber, but can also be used as cocktail railing.?
For a multi-tonal look, opt for Enhance Naturals. With its nature-inspired, authentic wood-grain appearance and lightweight, scalloped profile for simple handling, this collection offers the beauty of wood with the ease of composite.?
Note: Select boards are slightly thinner than all Transcend and Enhance decking; to avoid tripping hazards, these collections should not be combined.
- [GOOD]?Trex Enhance??Basics meld the durability of composite with the affordability of wood, resulting in long-lasting, worry-free decking. Trex Enhance Basics decking comes in three traditional colors, and because the boards are scalloped, they’re lightweight for easy handling.
- [BEST]?Trex Signature??aluminum railing offers minimalist style with maximum strength. Trex Signature? also performs equally well for residential or commercial settings. What's more, aluminum is a 100% recyclable and renewable resource and Trex Signature? is backed by the?Trex Signature?/Reveal? Limited Warranty.
- [BETTER]?Trex? Transcend?railing offers nearly limitless opportunities to mix and match profiles and colors for a customized look. Our highest-performance railing option offers more colors in more component profiles than any railing out there.
- [GOOD]?Trex Select??railing is our simplest and most affordable high-performance system. The Classic White rails and Charcoal Black balusters of Trex Select can also mix and match with different colors of Trex post sleeves, post sleeve caps and post sleeve skirts.
DOES TREX FADE OR CHANGE COLOR? Top
How well your Trex deck endures Mother Nature depends upon what type of Trex you have. Early generation composite decks - such as Trex Accents?, Trex Origins?, Trex Profiles?, Trex Brasilia? and Trex Contours? - do not have the high-performance shell with enhanced fade, stain and mold resistance. As such, these traditional composites will fade naturally over time, achieving their weathered color after 12-16 weeks. For Natural Weathering Information, click?here. Newer generation high-performance composites - Trex Transcend?, Trex Enhance? and Trex Select? - have the protective shell technology that provides superior fade and stain resistance.
DOES TREX DECKING GET HOTTER THAN PRESSURE-TREATED WOOD UNDER THE SUN? Top
Trex decking does not typically get hotter than pressure-treated wood, although on a hot day with a blazing sun, nearly any surface will get uncomfortably hot. Lighter colored boards tend to be slightly cooler than darker composite boards. In extensive studies, it has been found that the color of the decking board, regardless if it's made of wood-plastic composite or wood is the most significant factor in the "heat retention" of the board.?In these studies, pressure-treated wood stained the same color as Trex was actually hotter than Trex in the same test conditions.
HOW MUCH DOES TREX DECKING AND RAILING COST? Top
The cost of a Trex deck typically runs from $9 to $16 per square foot. As with many things in life, you get what you pay for. Initially, Trex decking and railing does cost more, board for board, than wood decking and railing. However, the payoff you get over time in decreased maintenance costs and increased leisure time provides compelling value-so much so, that you'll often see Trex decks referenced in the listings of homes for sale as an indicator of quality and value that homeowners and real estate agents tout when selling a home. Of course, the real value is in the time that you enjoy spending outdoors on your Trex deck. Our Cost Calculator will have your closest estimate for materials costs.
IS TREX SUITABLE FOR USE IN COMMERCIAL SETTINGS? Top
The breadth of the Trex lineup means that there are Trex products to suit nearly any residential or commercial need. Trex decking is widely used in commercial and public projects throughout the U.S. and around the world, ranging from a landing at Mt. Rushmore and a resort in Dubai, to a pier in Philadelphia and New Jersey-shore boardwalks replacing those destroyed by Hurricane Sandy. Of course, Trex is more than just decking. Trex Elevations? steel deck framing often provides the support beneath commercial projects, ranging from lakeside paths on a college campus in Utah to a large rooftop swimming pool and sundeck in the middle of Manhattan. The sleek profile of Trex Signature? railing works as well for commercial and multi-unit residential complexes as it does for your own backyard, while Trex Outdoor Furniture? can be found in many coastal resorts under Trex Pergola? installations.
HOW HEAVY IS TREX DECKING? Top
Trex boards are 50-70% heavier than comparable lumber sections.
IS TREX CODE-COMPLIANT? Top
All Trex products, when properly installed for approved applications, are either code compliant or are undergoing rigorous code compliance review for the International Residential Code (IRC) and/or the International Building Code (IBC). Check with your local building code department for jurisdictional requirements.
IS TREX STRUCTURAL? Top
Trex wood plastic composite products are not structural and should only be used for intended design purposes such as walking surfaces, guardrail systems, fencing and trim; however, Trex Elevations steel deck framing is a code-approved structural product (CCRR-0186).
IS TREX FIRE RESISTANT? Top
Nothing is more important than your safety outdoors. At Trex, we do everything we can to ensure it. Our Transcend and Select decking lines retain a Class B fire rating, while our Enhance decking lines retain a Class C fire rating; however, they are not fireproof. Moreover, our substructure product, Trex Elevations?, retains a class 1A fire rating.
CAN I BUILD A FIREPIT ON MY TREX DECK? Top
Wood or gas fire pits should not be placed on top of Trex decking. However, gas fire pits may be installed beside or between deck boards with a protective wall made of stone or other fire-resistant material used for insulation.?
Wood burning fire pits should not be placed on top of Trex decking unless installed with DeckProtect?, a product designed to temper extreme heat and loose embers. For more information, please?visit their website.
CAN I PLACE RUGS ON MY TREX DECK? Top
Most area rugs aren't a problem with Trex decking, but we do recommend cleaning underneath them regularly. In rare cases, rugs made of plastic or viscose materials may bleed, drawing colorant out of the decking or making them difficult to remove. Always allow your decking to fully dry before fitting a rug into place.
CAN TREX BE CURVED? Top
Dramatic curves are a hallmark of Trex decking and railing. All Trex Transcend? composite decking and composite railing can be curved using the?Trex CustomCurve??system and still be covered by the?Trex warranty. And the precise engineering of Trex Elevations steel deck framing makes the perfect canvas for curved Trex decking. Additionally,?Trex Signature? aluminum railing?can be curved to match staircases, bump-outs and nearly any custom perimeter. Our search filters can help you?find a builder?who works with curved decking and railing in your area.
CAN A GROOVE BE CUT IN THE SIDE OF A TREX DECK BOARD? Top
Yes, a groove can be cut in the side of Trex decking by using our?Trex Groove Cutter?to accept our recommended hidden fasteners, a system that enables deck installation without visible screw heads on the walking surface. More conveniently, Trex decking is also available in pre-grooved profiles, ready to install with our?Trex Hideaway? Hidden Fastening System.
CAN YOU RIP A TREX BOARD? Top
Trex products should not be ripped to reduce thickness, but can be ripped to reduce width. As long as the board can still be installed per the installation instructions, the warranty will be valid. Please use care when fastening ripped boards, as pre-drilling may be necessary.
CAN TREX DECK BOARDS BE GLUED? Top
Glue cannot be used as a primary fastener for Trex decking. When using Trex Fascia, glue can be used as a secondary fastener-see Fascia instructions in the Installation Guide for more details?Installation Guide?for more details.
CAN TREX BE PLACED OVER A SOLID SURFACE? Top
Trex can only be installed over a solid surface when using a sleeper system; see the sleeper system guidelines in our?Installation Guide.
CAN I PAINT OR STAIN MY TREX BOARDS? Top
The unyielding shell of our high-performance decking—Trex Transcend, Trex Enhance and Trex Select—means it never needs painting or staining. The rich color and protective finish are engineered right into the shell, and the shell is designed to remain free of rotting, splitting, splintering and insect damage for 25 years. Not to mention, painting Trex decking may void your warranty.
CAN I USE A NON-RECOMMENDED FASTENER TO INSTALL TREX DECKING? Top
Trex does not endorse the use of any non-recommended fastener. If any condition occurs which is attributable to the use of a non-recommended fastener, such conditions would not be covered under the Trex Limited Warranty. Please see our?Installation Guide?for more information.
CAN I USE TREX? RAINESCAPE? WITH TREX ELEVATIONS?? Top
Building a brand new deck from the bottom up is the perfect time to consider the below-deck water drainage product RainEscape, a system of flexible channels that easily works in concert with our Elevations steel deck framing system or with a wood substructure. Please refer to?RainEscape?for more information.
WHAT IS TREX ELEVATIONS?? Top
Trex Elevations?is a revolutionary steel deck framing system that provides a stronger, straighter, safer and smarter foundation for Trex high-performance decking and railing products. Dimensionally stable steel provides consistency and reliability that wood doesn't, and is more fire-resistant as well. Leveraging the strength of steel, Elevations can span longer distances between posts and precise engineering ensures surfaces that remain flat over time.
WHY IS TREX ELEVATIONS BETTER THAN WOOD DECK FRAMING? Top
Trex Elevations leverages the strength and dimensional stability of steel to create a flat surface for the decking above. Wood, on the other hand, often has inconsistent dimensions and can warp or twist over time. Those imperfections below can be amplified to the decking above. Simply put, high-performance decking deserves a high-performance deck frame.
DOES TREX ELEVATIONS COST MORE THAN PRESSURE-TREATED WOOD DECK FRAMING? Top
In most cases, individual Elevations' components cost more than pressure-treated wood components. The Elevations steel deck framing system does offer efficiencies not found with wood, including the ability to build longer spans and extend cantilevers with Elevations joists and beams. In addition, Elevations joists are now available in one-foot increment lengths, requiring fewer materials overall. Elevations also comes with a 25-year limited residential warranty, making it a smart investment.
CAN ELEVATIONS STEEL DECK FRAMING BE USED IN HIGH FIRE DANGER AREAS? Top
Elevations components are non-combustible, carry a Class 1A fire rating and can be used for extreme wildfire building areas such as Wildland Urban Interface (WUI) areas.
CAN I BUILD A DOCK OUT OF ELEVATIONS? Top
Due to increased risk of corrosion, do not install Elevations within 3,000 feet (.6 miles) of any body of saltwater or under the surface or within the splash zone of any body of fresh water. Any such installation will void the limited warranty.
IS ELEVATIONS CODE-COMPLIANT? Top
Yes. Trex Elevations is CCRR-1086 compliant.
CAN TREX DECKING BE SANDED OR POWER WASHED? Top
Trex should never be sanded. Sanding will change the appearance and protective qualities of the Trex material and will void the warranty with respect to any condition caused by sanding.
For our early generation composite decking (Trex Accents, Trex Origins, Trex Brasilia, Trex Profiles or Trex Contours), Trex does not recommend the use of a power washer. Use of a power washer will damage the decking surface and will void the warranty with respect to any condition caused by the power washing.
Trex high-performance decking (Trex Transcend, Trex Enhance and Trex Select) can be power washed. Use only a fan tip and up to a 3100 psi power washer to remove dirt and debris. The fan tip should be no closer than 8 inches (20.4 cm) away from the protective shell during use.
IS TREX DECKING MAINTENANCE-FREE? Top
Trex decking requires far lower maintenance than wood decking, but does require some?maintenance?to keep it looking good throughout the years, much like washing your car. For early generation composite decking (Trex Accents), periodic cleaning with a deck wash is required. Trex high-performance decking (Trex Transcend, Trex Enhance and Trex Select) require less work - a simple soap and water cleaning is all that is necessary to maintain the beauty of the products.
IS TREX DECKING SCRATCH RESISTANT? Top
Newer-generation Trex decking holds strong against potential damage. All of our decking lines are scratch resistant, protecting your space against nicks, cracks and splitting.
HOW DO I REMOVE GROUND DIRT FROM CONSTRUCTION OF MY TREX TRANSCEND DECKING? Top
A pressure washer with no greater than 3100 psi that has a fan attachment/adjustment and soap dispenser may be used to remove dirt, concrete dust, or other types of construction dirt. Spray deck with soap, and then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using fan tip no closer than 8" from the decking surface. RINSE THOROUGHLY. If dirty or hard water containing minerals is used for cleaning, a film-like surface may appear in spots after drying. Generally, these spots can be cleaned with white vinegar or a deck brightener product. On railing, they can be cleaned with Magic Eraser? or white vinegar. Refer to our?Care & Cleaning Guide?for more information on upkeep and warranties.
CAN I USE ROCK SALT TO MELT ICE ON MY TREX DECKING? Top
Calcium chloride or rock salt can be used to melt ice and snow on Trex decking. Care should be taken to rinse off when the weather makes this practical. Use plastic shovels (never metal) to remove snow and ice. A metal shovel can possibly chip the decking surface and void the warranty.
HOW CAN I CLEAN MY TREX TRANSCEND OR TREX SELECT RAILING? Top
For color transfer issues (color transfer can happen when baluster spacers rub against balusters during installation), use Mr. Clean?, Magic Eraser? Original or Magic Eraser? Extra Power for spot removal. For small surface scratches, marks or scuffs, try Plexus? Plastic Cleaner. Never use acetone or other solvents on Transcend or Select railing.
CAN I USE A DIFFERENT TRANSFORMER WITH MY TREX? DECKLIGHTING?? Top
Trex requires that you use only the Trex transformer supplied with our lighting. Using any other transformer voids the warranty.
CAN I INSTALL TREX? DECKLIGHTING? ON MY OWN? Top
Trex DeckLighting is easy to install, and even easier to enjoy. Our plug-and-play setup is one of the most intuitive and simple lighting systems on the market.?Refer to this video?for the basics, and if you have any questions feel free to give us a call. We're happy to help you add lighting to your new (or existing) deck.
- What are Trex Spiral Stairs?
- What measurements do I need to order a spiral stair kit?
- Are there special building code requirements to consider when installing a spiral stair kit?
- Are there any special spiral stair kit ordering considerations you need to make for children or pets?
- How long does assembly take? Do I need a contractor to help me install my spiral stair kit?
- I want to paint my galvanized spiral stairs a custom color. Should I paint them before or after assembly?
- What if something goes wrong?
- What if I lose my installation manual?
- What if my building department or inspector asks for an ICBO number?
WHAT ARE TREX SPIRAL STAIRS? Top
Trex Spiral Stairs?offer all the space-saving advantages of traditional spiral staircases in two material choices and come with custom, high-performance composite treads made from Trex decking. Trex Spiral Stairs were developed by the leading spiral stair manufacturer in the country, The Iron Shop, under a trademark license agreement with Trex Company, Inc
WHAT MEASUREMENTS DO I NEED TO ORDER A SPIRAL STAIR KIT? Top
You will need to measure the exact height within .25" between the landing area and the top of the deck, including the width of the decking to ensure that your stairs end on the correct side.
ARE THERE SPECIAL BUILDING CODE REQUIREMENTS TO CONSIDER WHEN INSTALLING A SPIRAL STAIR KIT? Top
Many areas follow BOCA or UBC codes or variations of the BOCA or UBC codes. All Trex Spiral Stair products pass BOCA/UBC code requirements. We recommend that you contact your local building inspector to find out what code applies to your area and how that code is interpreted.
ARE THERE ANY SPECIAL SPIRAL STAIR KIT ORDERING CONSIDERATIONS YOU NEED TO MAKE FOR CHILDREN OR PETS? Top
For small children and pets, our code stair kits come standard with in-between spindles, which provide less than a 4" spacing between verticals. In addition, you may want to use a gate at the top of the stair.
HOW LONG DOES ASSEMBLY TAKE? DO I NEED A CONTRACTOR TO HELP ME INSTALL MY SPIRAL STAIR KIT? Top
Installing a stair kit is a two-person job. For the typical do-it-yourselfer, the stairs can be installed without the help of a contractor. However, we do recommend that everyone (experienced or inexperienced) consult a qualified contractor. The contractor can help identify whether any additional structural support is necessary and required, and he or she can reroute pipes and electric lines. For two do-it-yourselfers, the spiral stairs can be assembled in about 6-8 hours. For all stair kits, you need basic hand tools and an electric drill. Before installing, we strongly recommend that you read the entire?installation manual.
I WANT TO PAINT MY GALVANIZED SPIRAL STAIRS A CUSTOM COLOR. SHOULD I PAINT THEM BEFORE OR AFTER ASSEMBLY? SHOULD I USE ANY SPECIAL PAINT OR FINISH? Top
Galvanized stairs must weather before painting. Once weathered, contact your local paint store for the appropriate primer and paint for something that has been galvanized.
WHAT IF SOMETHING GOES WRONG? Top
If you run into a problem, call Trex Spiral Stairs at 877-488-1906. Our kits are guaranteed for 25 years from date of purchase.
WHAT IF I LOSE MY INSTALLATION MANUAL? Top
A PDF of our installation manual is available at?trexspiralstairs.com/faqs.html.
WHAT IF MY BUILDING DEPARTMENT OR INSPECTOR ASKS FOR AN ICBO NUMBER? Top
The following are available for Trex Spiral Stairs:
LA City Standard Plans for spirals:
??Std Plan 111-T City of Los Angeles for CBC/IRC Metal Spirals for all Trex Spirals
??Std Plan 111 has also been adopted for City of San Diego, Calif.
City of Los Angeles Licensed Steel Fabricator #1150 (City of Los Angeles conducts random inspections on our fabrication plant in Broomall, Pa.)
County of San Bernardino Licensed Fabricator
- Is Trex Outdoor Storage cabinetry built from Trex decking?
- Is the Trex Outdoor Storage color only on the surface?
- Are the resin doors very light?
- Does the resin contain any wood fibers?
- The doors look like they are made in sections. Are these resin sections glued together?
- Can the resin be painted?
- How do I clean the cabinets?
- What is the hardware made out of?
- Is assembly required?
- Do the drawers and doors keep out rain?
- How do the cabinets hold up with full sun exposure?
- Do I need to prepare my deck for the cabinets?
IS TREX OUTDOOR STORAGE CABINETRY BUILT FROM TREX DECKING? Top
No.?Trex Outdoor Storage?is built using 3/4" white PVC boxes with the exterior doors and parts molded from a high-density resin. Both are closed cell and 100% waterproof.
IS THE TREX OUTDOOR STORAGE COLOR ONLY ON THE SURFACE? Top
Yes. The exterior is a very high-quality finish that has a UV inhibitor to protect the color from fading. The resin is extremely dense and chip and scratch resistant so the finish is hard to penetrate. If a chip or scratch does happen from a hard impact, the area can easily be repaired with our touch up kit or any matching Minn Wax crayon or marker you can get at your local hardware store.
ARE THE RESIN DOORS VERY LIGHT? Top
Actually, the doors are built with an ultra-high density resin giving the doors extreme hardness and actually weigh more than a real cypress wood door. The PVC boxes are similar in weight to 3/4" plywood.
DOES THE RESIN CONTAIN ANY WOOD FIBERS? Top
No, the doors and all parts are 100% high density waterproof resin.
THE DOORS LOOK LIKE THEY ARE MADE IN SECTIONS. ARE THESE RESIN SECTIONS GLUED TOGETHER? Top
All Trex Outdoor Storage doors are made with one solid mold, giving the look of a multi-piece door but with no chance of the separation you can see in real wood doors.
CAN THE RESIN BE PAINTED? Top
Yes. All resin parts are painted and top coated with a product that can be easily painted over with oil or latex paint. Glazing over the paint works great as it binds to the natural grain of the product, enhancing the realistic look.
HOW DO I CLEAN THE CABINETS? Top
No power washing necessary. The PVC interior and the exterior High Density Resin cleans up with soap and water. Interiors and Exteriors can be sprayed with a standard hose as all materials are waterproof.
WHAT IS THE HARDWARE MADE OUT OF? Top
Trex Outdoor Storage cabinets use stainless steel 110-degree self-closing hinges and stainless steel full extension drawer guides. Stainless steel screws are used to secure cabinet boxes in addition to PVC adhesive that actually bonds the boxes together giving a product that will not ever separate.
IS ASSEMBLY REQUIRED? Top
No. All cabinet boxes come assembled. A separate trim is available for our skirting insert boxes to frame out the boxes and create a finished projected side. This allows installation of brick, stackstone, and other exterior skirting coverings to neatly fit the box.
DO THE DRAWERS AND DOORS KEEP OUT RAIN? Top
Both our drawer fronts and doors fit tight to the box front that helps keep rain out. Fully exposed cabinets in high wind and heavy rain may experience some moisture getting into the cabinet, but these are extreme conditions.
HOW DO THE CABINETS HOLD UP WITH FULL SUN EXPOSURE? Top
Our high-quality UV protection top coat will reduce fading. Resin products tested for over six years in full sun exposure have shown very little sign of fading.
DO I NEED TO PREPARE MY DECK FOR THE CABINETS? Top
Only if you are using the insert cabinets that slide into your skirting. An opening with a deck must be built into the side of the skirting so the cabinets can be slid into the space. The deck cabinets are simply mounted to the wall. If used as an island, panels are available to cover the back. Island cabinets can be secured to the deck for high wind areas using our PVC blocking.